Usb drive wont eject mac

You can also mount cloud storage as local drive on your Mac.

By connecting Google Drive, Dropbox, or Amazon to your computer, you get more space for securely accessing and sharing files. For your ease, add cloud drives to Finder with CloudMounter app, so that you keep them close at hand. You can read detailed instructions on managing cloud storage as local drives here. If your drive is having problems, you can try to fix them yourself with First Aid and therefore get access to your files.

First Aid tool will check the disk for errors and then attempt a repair as needed. It helps to verify and repair a range of issues related to startup HD and external drive problems. If you are able to fix the hard drive or SSD in your Mac or an external drive using Disk Utility you will hopefully be able to recover your files. Thankfully, there is an app for that. Powerful enough to retrieve long-lost, mistakenly deleted files from Macs, external hard drives and USB drives and camera cards.

Disk Drill Pro recovery app is available from Setapp , along with dozens of Mac apps that will make your life easier. Never have to worry about a crashed or corrupted external drive again. Then use a different port to connect the external hard drive. For Macs with removable batteries, you need to switch them off, remove the battery, then press and hold the power button for 5 seconds. After that, put the battery back in, plug in the power adapter and switch the power on again.

It is possible to format a hard drive so it can be read on Mac and Windows computers, providing you format using exFAT. The common issue is Ext2- and Ext3-formatted drives are not readable on macOS. The easiest would be installing Linux to a secondary drive or virtual machine. If you go with Linux installation, dual boot your Mac with Linux on another drive and use FAT32 as a transfer intermediary. Basically, it works as an extra interface enabling file system access via specially installed modules.

Macworld Categories

Employ the handy all-powerful Terminal, which always comes forward with solutions for difficult problems. Console shows if an external drive or any error is detected under the Errors and Faults tab. If no errors show up, then the problem is not caused by the device. To sum up, there are lots of potential solutions for a Mac not reading an external hard drive. If we were to pick one, Disk Drill seems to be the most well-rounded, offering plenty of customizations and power in an easy-to-use interface.

Start with the basics: Check whether the drive is properly plugged in. Faulty cable.

Try connecting the same device with a different cable. Damaged USB or flash drive port. It could be a hardware issue with the Mac. Reboot your Mac. Sometimes, if a disk won't boot, the cause is macOS issue. Hopefully, some data damage that can be fixed by restarting. Or press and hold the power button and, when a dialog box appears, click the Restart or press R. Incorrectly formatted drive. Not every drive is optimized for Macs. It could be that you are trying to connect something only fit to interact with Windows devices.

See if the external drive shows up here. For more information, go to the same menu option, then select System Report. Mac not formatted to display external drives on the desktop. Even if that is the case, the drive will still appear in the left-hand column of the Finder menu under Devices. To do this, shut down or restart your Mac, switch it back on and immediately press these four keys together for at least 20 seconds: Option, Command, P, and R. I could even open it up the and see all my files.

Popular Topics

I had about 6 Photo libraries some from iPhoto years ago. And I had folders with s of photos I did not want to loose. This was the only thing that worked to get my drive back. My mistake was disconnecting usb cables to move some things around without first ejecting the drive. This did not effect my other drives but just this certain one.

My suggestion to everyone is to remember to eject before pulling the usb connectors off the computer. Thanks in advance. Have you tried Disk Utility? Does it see your drive and the info on it? In that case, remove the hard drive from its current enclosure and place it in another enclosure—then see if your Mac recognizes it.

If that sounds confusing, take your external drive to an Apple repair shop does not have to be an Apple Store shop or Apple Support shop—just a shop that fixes Apple products and ask them to take out your disk and check it using another enclosure. When I plug it into my Macbook, the lights on the external enclosure turn on, but my Macbook does not detect it. Make sure you connect the drive to a port on the Mac directly—not via a hub. All my data is on this Toshiba external 1 TB drive which cannot be mounted, ejected etc by my Macbook air.


  • Finder won't let me eject my USB drives! - Apple MacOS - Neowin.
  • Windows 7/Windows 10 Has Problems in Ejecting an External USB Drive.
  • free 8 bit mac games.
  • friendly for facebook mac free;
  • What is the Worst that Could Happen?;
  • free video editing app store mac.

Super slow jam works!!!!!!!!!!!!!!! Thanks so much for all of this info! Any advice on where to from here? Are you able to open the Mac App Store—this connection invalid error means that you should not be able to open the App Store at all. So see if you can. In English: After trying everything, I decided to look at the insides of my old hard drive. I checked the contacts and sure enough, the contacts were bad because the connector was loose. Sometimes it worked and sometimes it did not. Ultimately, I discovered that there were screws were missing. First thing is to restart your computer.

If so, try and mount it. This command shows the list of all connected drives. If your external drive shows up, take note of the number. Next type in this command to force the disk to mount put the disk number where the underscore is at the end. Then unplug your drive from your PC, restart the computer, and plug the drive back in. See if it now mounts. Then, I thought I got smarter and used a 3rd party app LiteIcon to replace the drive icons as well. Apparently, this was because LIteIcon replaced files directly in the extension bundle.

8 Ways to Force Eject a Disc from Your Mac's Optical Drive

Luckily the solution is fairly simple, and involves changing icons back to normal. Just wanted to pass that along in case anyone else out there is stuck trying to figure it out. Thank you so much for sharing your adventure in sorting out the problems with your MacBook. My USB port was working fine yesterday…but now trying to plug in anything is impossible. Comparing it to my 2nd USB port, it looks less deep, as if the end came loose and got stuck. Any idea how to fix this?

Oh my goodness, what a pain! Have you inspected that port with a flashlight to ensure that there is not anything stuck inside the port? If your Mac has AppleCare or is under the limited warranty, seek out assistance immediately and request a repair now before your AppleCare expires. Contact Apple Support. Set-up an appointment at the Genius Bar at your local Apple Store for hardware evaluation and assistance Genius appointments are free—those parts and labor to fix are not unless covered by AppleCare or if you make a strong and insistent case.

I have a MacBook Pro from and an external hard drive Samsung portable something…. I had it plugged in today and it worked just fine. Then, as I was moving my computer the hard drive fell down still plugged in. After a little while I heard a ticking noise from the hard drive and tried to eject it, but the computed refused to do that, so I pulled it out without ejecting.

Any idead on how to fix this??

Sorry to hear about your external drive. That ticking or clikcing noise is often an indicator that the something is seriously amiss with the drive heads. What you can do is let the drive rest, unplugged without access to power for a few hours and then try again. But only try this once—trying to access a clicking drive repeatedly will actually make things worse. Once you plug the drive back in, open Disk Utility and see if it recognizes the drive at all.

If so, try First Aid.